KLINGER MAXIGRAPH 104G

Klinger Maxigraph Style 104G gaskets are manufactured from corrugated metallic rings with a lamination of graphite on both sides, thus giving an initial soft seal gasket enabling an effective seal to be obtained at low initial stress levels. 

Effective Sealing at Low Stress Levels
Semi Metallic Gasket
KLINGER Maxigraph 104G has a lamination of 0.5 mm, 1 density,
minimum purity 98% graphite laminated to both sides, thus giving an initial
soft seal enabling an effective seal to be obtained at low initial stress levels.
The standard core thickness is 0.5 mm, but can vary up to 0.79 mm,
depending on customer requirements ( before corrugation ), corrugation
nominal pitch is 3 mm. Nominal thickness of core after corrugation is
1.6mm.
Inner and outer steel cleats are recommended on large gaskets to
increase rigidity for handling purposes. This can also improve the sealing
characteristics on all sizes of gaskets and protect the inner and outer
sealing face from erosion and pre mature oxidation in service.
Applications
» Vessel applications with narrow seating widths
» Pipeline applications
» Suitable for a wide range of application temperatures