Metal Jacked Gasket Tombo 1841-A

Metal jacketed gasket - TOMBO No. 1841-A 

1. Tombo No 1841-A can be manufactured in various shapes, such as a branched type, according to the particular application and the intended location.
2. It is used in heat exchangers, pressure vessels, towers and vessels, equipment, valves, high-temperature coupling flanges, manholes, etc

Applicable 

Water、Steam、Hot water、Brine、Seawater、Petroleum hydrocarbon、Alcohol、Animal and mineral oil、Thermal oil、Aromatic hydrocarbons (benzene, toluene, xylene, etc) / organic solvents / thermal oils、Organic solvent、Weak acid、Weak alkalis、Saline、Air、Exhaust gas etc.

■ Precautions for use
・When using a metal jacketed gasket for a gas-type fluid, use it together with GRASEAL™ (expanded graphite) tape or gasket paste (NEVER-SEEZ (service temperature range: -183 to 1316℃),etc.).

・When using a metal jacketed gasket with a T&G type flange, install the gasket so that the face with the turned edges is at the inside of the groove.

・A standard pipe flange cannot readily acquire adequate tightening force, therefore the use of a metal jacketed gasket is not recommended. If it necessary to use a metal jacketed gasket, the use of one with a hanger rather than a self-centering type is recommended.