NAFLON VORTEX gasket (With outer ring)

Name: NAFLON VORTEX gasket (With outer ring)
Brand: Nichias Japan
Availability: InStock

Thương hiệu: Nichias Japan

Liên hệ

Để lại số điện thoại, chúng tôi sẽ gọi lại ngay

TOMBO No. 9090-OR

Application

Water、Steam、Hot water、Brine、Seawater、Petroleum hydrocarbon、Alcohol、Animal and mineral oil、Aromatic hydrocarbons (benzene, toluene, xylene, etc) / organic solvents / thermal oils、Organic solvent、Thermal oil、Weak acid、Weak alkalis、Saline、Strong acids、Strong alkali、Air、Exhaust gas、Combustible gas、Toxic gas、Hydrogen gas、Ammonia、Oxygen、Cryogenic fluids such as liquefied gas etc

When this gasket is to be used as a pipe flange gasket, use a gasket thickness of 4.5mm as a general rule.

We can also manufacture gaskets to the dimensions other than the above. Please consult us for details.

Applicable industry

Food and beverage plants、Steel plants、LNG terminal and LNG carriers、Paper mills、Thermal power plants、Industrial、Oil and Gas、Chemical etc.

■ Precautions for use
● Before installation
・Before installing a gasket, clean the flange face and confirm that it is free of foreign matter and damage.
・Handle a gasket with care. Particularly, a large bore gasket may break (break up),
arange several persons handle it carefully.
・Place a gasket in a suitable position so that it does not shift to one side of the flange.
・There is no need to apply gasket paste, as a general rule. However, if it is necessary and the temperature is not higher than 300℃, apply No.9400 (NAFLON paste).
・You cannot reuse a gasket.
● When using a basic type of VORTEX gasket
A basic type VORTEX gasket (including an irregularly shaped gasket) may deform under a very small force, so be very careful when installing it. Note that even if the gasket becomes slightly deformed, it may be possible to insert it into the flange groove and use it as it is, please consult us for this matter.

Comments

Sender